The Pressure Relief Valve (PVR) are made to the Cornelius Standard and are compatible with Cornelius type Kegs. The Pull-Ring Style will allow quick relief when needed.
Compatibility:
The Pressure Relief Valve are suitable for use on Corny Kegs, MK4 Regulators and Kegmenter Lids.
Operating Pressure:
GREY Pressure Relief Valve - Maximum Pressure Rating: 100psi
Additional Information:
The Pressure Relief Valves are accurately made and batch tested for consistency.
This important safety mechanism has been manufactured to tight specifications to ensure its reliability.
This is the most common Relief Valve used on all Ball Lock Kegs.
If a Lever Tab second hand Ball Lock Keg is being used, switch it out with a new Pressure Relief Valve.
Maintenance and Cleaning:
The Pressure Relief Valve needs to be cleaned regularly to ensure correct operation. If dried up Beer or Sugar gets into the Pressure Relief Valve, then remember to clean this out immediately as this can affect the safe working and opening pressures.
PLEASE NOTE:
There are 3 different Pressure Relief Valve types that differ in opening pressure:
RED – 35psi (2.5 Bar)
GREEN – 65psi (4.5 Bar)
GREY – 100psi (6.9Bar)
The Pressure Relief Valve is a safety device designed to release pressure at the approximate rated pressure. THIS IS NOT TO BE USED AS SPUNDING VALVE.
The pressure rating on the Pressure Relief Valves are approximate and have a tolerance of +/- 10psi.
If accurate pressure control is required to hold residual pressure in a Pressure Fermenter or Pressure Vessel, a BlowTie Spunding Valve should be used. Alternatively, a BlowTie Spunding Valve Kit should be purchased.
