BEER & WATER FILTERING SYSTEM - 10"

The Beer Filter System can also be used to filter out yeast in the distillation wash. By removing yeast before putting the wash into the boiler this will significantly improve the quality of the final Spirit. Many off flavours in Distillation can come from boiling yeast cells. When the yeast cells get boiled they break open releasing many off flavours aromas and fusil oils.

The Beer Filtering System works best when used as the middle man when transferring icy cold (4°C) Uncarbonated Beer between two Kegs.

Features:

Clear High Pressure Housing

¼" Female Thread Inlet and Outlet Ports

Compatible with other 10” Filter Systems

Single O-Ring Seal

Maximum Pressure: 6 Bar / 90PSI

Maximum Operating Temperature: 4 - 38°C

Housing Dimensions: 31cm (H) x 12cm (W)

Including:

The Beer Filtering System comes as standard with a Filter Cartridge and DuoTight Fittings that are compatible with EVA Barrier 6.5mm ID x 9.5mm OD Line.

PLEASE NOTE:

Hot liquids exceeding 38°C should not be used in direct contact with the filter housing.

DO NOT use this filter on unrestricted mains water pressure exceeding 90psi.

Clear plastic housings are more prone to damage from pressure spikes and/or mishandling. It is recommend to handle the housing with care and to install a pressure regulator / protection valve before the housing.

The dimensions of the housings may vary a few millimeters from housing to housing.

Due to photographic lighting and different devices used to view the product, the colour of the product may vary slightly.