PLEASE NOTE: OUR PHYSICAL STORE IS NOW CLOSED UNTIL THE 13th JANUARY 2025.
BUT DON'T WORRY OUR ONLINE STORE WILL BE OPEN TILL THE 23rd DECEMBER
WE WILL ONLY CLOSE FROM THE 24th DEC, TILL 2nd JAN 2025.
ORDERS PLACED BETWEEN 24th - 2nd WILL ONLY BE SENT AFTER THE 2nd JANUARY 2024
This In-Line Regulator is suitable for reducing pressure on mains water, gas and liquid lines. The 8mm (5/16") DuoTight Push-In connectors to allow easy line connections directly into the unit. Simply push-in your EVABarrier tube into the connector on the regulator and it is securely joined.
The DuoTight In-Line Regulator is manufactured from Acetyl, Nitrile and Stainless Steel Components. There is a highly visible yellow Tee-Bar adjustment knob on the unit which is used to adjust the pressure.
Operating Pressure:
0 – 150psi
Compatibility:
EVABarrier 4mm ID x 8mm OD Line.
EVABarrier 5mm ID x 8mm OD Line.
EVABarrier 8mm OD Line – most will fit.
PLEASE NOTE:
It is recommended that the tube is cut straight, not at an angle, to ensure the line has a complete seal.
To remove the fitting, simply push in the collet and the tube can then be removed.
Additional Information:
The secret to the superior sealing performance is not just the fact that a high quality EPDM O-Ring is used but there are two of them. The Double O-Ring means that there is literally have twice the sealing surface when compared with other push in fittings.
This makes the DuoTight fittings even more reliable and reduces the chance of leakages significantly.
The Double O-Ring System also means that a tube can be bend in a much tighter radius without causing leaking issues.
No clamps required.
The DuoTight In-Line Regulator is constructed with Non-Corrosive Acetyl, Nitrile O-Rings & Stainless Components.
The Regulator body has two wall mounting points.
These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi.