This In-Line Regulator is suitable for reducing pressure on mains water, gas, air and liquid lines. The 8mm (5/16") DuoTight Push-In connectors to allow easy line connections directly into the unit. Simply push-in your EVABarrier tube into the connector on the regulator and it is securely joined.
The DuoTight In-Line Regulator with Integrated Pressure Gauge is manufactured from Acetyl, Stainless Steel Teeth and EPDM O-Ring Seals. There is a highly visible yellow Tee-Bar adjustment knob on the unit which is used to adjust the pressure.
The DuoTight In-Line Regulator with Integrated Pressure Gauge includes an integrated 0 – 60psi Pressure Gauge.
Operating Pressure:
0 – 60psi.
Compatibility:
EVABarrier 4mm ID x 8mm OD Line - Suitable for higher pressure connections.
EVABarrier 5mm ID x 8mm OD Line - Suitable for lower pressure connections.
EVABarrier 8mm OD Line – most will fit.
Please Note:
0 – 60 psi Pressure Gauge Supplied with the unit.
These small gauges enable the regulator to be so compact, however for more accurate pressures readings, different gauges can be added depending on the pressure ranges required.
DO NOT EXCEED GAUGE PRESSURE.
If the gauge pressure is set higher than the graduations on the gauge, damage to the gauge may occur.
For example: If the 0 - 60psi gauge is used, please DO NOT set pressure above 60psi or damage to the gauge may occur.
It is recommended that the tubing being connected is cut straight and not at an angle, to ensure the line has a complete seal.
To remove the fitting, simply push in the collet and the tubing can then be removed.
Additional Information:
The secret to the superior sealing performance is not just the fact that a high quality EPDM O-Ring is used but there are two of them. The Double O-Ring means that there is literally have twice the sealing surface when compared with other push in fittings.
This makes the DuoTight fittings even more reliable and reduces the chance of leakages significantly.
The Double O-Ring System also means that a tube can be bend in a much tighter radius without causing leaking issues.
No clamps required.
The Regulator body has two wall mounting points.
These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi.