EVABARRIER BEER / GAS LINE - 6.35MM X 9.5MM

The EVABarrier 6.3mm ID Beer / Gas Line is a high quality line which is ideally suited for Gas, IceBank, Temprite or Long Draw Keg Systems where lower line resistance is desirable.

Pressure Rating (with 1.5 safety factor)
30C - 1.4MPa (200psi)
50C - 0.7MPa (100psi)

Please Note:

The EVABarrier 6.3mm ID Beer / Gas Line is not recommended for direct draw Kegerators as it does not apply much flow resistance.

This EVABarrier Line is sold per meter - R75.00p/m

Additional Information:

When using EVABarrier Beer / Gas Line in a Kegerator, 6 – 8 meters of line would be needed to allow the adequate flow resistance. For this reason, we would normally recommend the smaller 5mm or 4mm ID Beer / Gas Lines for Kegerator setups.

This new EVABarrier Double Walled Tubing is made with an EVA Outer Wall and also an Inner Proprietary Polymer Barrier.

Outer Barrier
The Outer Barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various John Guest, DuoTight or other push in fittings. The Outer Barrier gives the tubing excellent kink resistance - the line is able to bend around a tight radius without kinking.

Inner Barrier
The Inner Barrier is made from a Proprietary Polymer that has excellent Gas Barrier. The significantly better barrier properties allow better protection from Oxygen and CO² loss. This assists with longevity of the beer as there is no loss of Carbonation.

Some beer line types, you may notice that the beer sitting in the lines starts to taste flat and or oxidised when sitting in the lines for an extended period.

EVABarrier tubing is significantly better in this regard and due to the high density and smooth nature of the EVABarrier Inner Barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.