PICNIC TAP 2.1

The Picnic Tap 2.1 is a uniquely designed Beer Tap that is a must for any Brewer. Handcrafted and individually tested in California, the Picnic Tap 2.1 is great for use with Growlers, Corny Kegs, Oxbar Kegs and Sankey units.

Features Include:

Compact Progress Flow Reducer (CPRF) can be cut shorter at the tap-side to increase the flow rate.

The Picnic Tap 2.1 is forward sealing for easier cleaning and sanitation while in use.

Non-Drip Tap – No Drip Tray is required.

No need for additional disconnects.

No Beer Line is required.

The Picnic Tap 2.1 has a low thermal mass and therefore does not foam wastefully at 15psi.

Included:

1 x Picnic Tap 2.1 Complete

1 x Spare Seal

1 x Additional Tap Head

1 x Allen/Hex Key for Easy Tap Head Removal

Instructions for Use:

Sanitize the unit before use.

Refrigerate the Tap to reduce foaming at the first pour.

Do not overtighten the anodized tube more than necessary. This will avoid over-compressing the O-Ring and prevent tiny bubbles from being created.

Hold the Anodized Tube while swiveling the Tap Head.

To close the Tap, turn the Tap Knob fully until it clicks.

Storage Instructions:

Use a standard PCO 1881 Thread–Soda Bottle and fill with the correct solution of Sanox Sanitizer (MSS1).

Attach a Carbonation Cap (KL10788).

Connect the Picnic Tap 2.1 to the Carbonation Cap with the Tap opened and pointed upwards.

Hold the Soda Bottle upside down over a sink and squeeze to flush the Picnic Tap 2.1.

Place the Soda Bottle down in an upright position to allow the sanitizer solution to drain back into the bottle.

Close the Tap on the Picnic Tap 2.1 and refrigerate to keep it cold and ready for use.

PLEASE NOTE:

To have a good pour, you need a cold beer, a cold tap and a slow flow!