PLEASE NOTE: OUR PHYSICAL STORE IS NOW CLOSED UNTIL THE 13th JANUARY 2025.
BUT DON'T WORRY OUR ONLINE STORE WILL BE OPEN TILL THE 23rd DECEMBER
WE WILL ONLY CLOSE FROM THE 24th DEC, TILL 2nd JAN 2025.
ORDERS PLACED BETWEEN 24th - 2nd WILL ONLY BE SENT AFTER THE 2nd JANUARY 2024
PUSH-FIT - T-PIECE - 9.5MM
The Push-Fit Fitting is a high-quality component with superior sealing capacity, thanks to its Double O-Ring design.
The Push-Fit -T-Piece - 9.5mm (3/8”) Female x 6.35mm (1/4") Female x 9.5mm (3/8") Male Push-In Fitting.
Widely used in the commercial beer and beverage industry, Push-Fit fittings are incredibly convenient. Simply push the tube into the fitting to create an instant, permanent, and leakproof connection.
Additional Information:
The Push-Fit Fittings are designed for easy connection, disconnection, and reuse without the need for replacement parts or tools.
Hand tighten only. Over tightening could damage the fitting.
The Push-Fit Fitting is food quality and suitable for potable liquids, air or inert gases.
The Push-Fit Fitting can be used with soft metal or plastic tubes.
Operating Pressure:
1psi - 100psi
Compatibility:
EVABarrier 6mm ID x 9.5mm OD Line.
This fitting is NOT compatible with 8mm OD EVABarrier line with a 4mm or 5mm ID. There are other Push-Fit Fittings that are sold separately for this application.
PLEASE NOTE:
The colour of the Push-Fit Fittings may vary depending on stock supplied - White, Cream, Grey or Black.
It is recommended that the tube is cut straight, not at an angle, to ensure the line has a complete seal.
To remove the fitting, simply push in the collet and the tube can then be removed.